TM
LIVEBarn Aisle
Watcher activeView camera
BarnPilot Cameras
Your horse,
always in sight.
Open a live view, look around the stall with pan and tilt controls, and keep watch after the barn lights go out with automatic infrared night vision.
Live on your paired iPhone
Night infrared vision
Pan + tilt controls
BARN AISLELIVE
10:42 PM
AUTO NIGHT VISION
PAN
Look left or right
TILT
Look up or down
Camera Focus
Want monitoring without the rest of the dashboard? You can do that too.
Camera Focus turns BarnPilot into a dedicated horse monitoring workspace. Open straight into the cameras, see which horses and stalls are active, check Watcher status, review alerts, and start a Sentinel session without moving through the full equestrian command center.
- A focused camera dashboardLive views, monitoring status, and alerts stay together.
- Built for monitoring-only useYou do not have to use every BarnPilot workflow to use the cameras.
- Live, Watcher, and SentinelMove from looking in to everyday monitoring or a user-defined heightened watch.
CAMERA FOCUSMonitoring
All systems online
WatcherRoutine monitoring active
ONSentinelNo heightened session
READYAssigned horses2 connected to this view
2Live camerasMonitoringAlerts
One view. Three ways to use it.
Look in now. Let Watcher follow the routine. Tell Sentinel exactly what matters.
BarnPilot connects the camera to your horse workflow. You remain in control of the camera, the horses assigned to it, and every special Sentinel instruction.
Live camera
See the stall for yourself.
Open the live feed on the iPhone that securely paired the camera. Make small pan and tilt adjustments to change the view, turn automatic infrared night vision on or off, and flip the image for an upside-down mount.
- Live view on the paired iPhone
- Four-direction pan and tilt
- Automatic infrared night vision
Watcher Standard
Everyday monitoring, without watching all day.
Watcher uses camera-powered updates for routine care and notable visible activity. It is built for everyday awareness around feeding, stall cleaning, turnout, and the patterns that make up a normal barn day.
- Included for one camera with Pro
- Reconnects automatically if interrupted
- Assign several horses to one camera
Enhanced Protocol
Your concern. Your words. Your watch.
Sentinel is not a generic alert switch. You describe the situation and write the exact visible condition or behavior you want BarnPilot to watch for during one heightened 24-hour session.
- You choose the camera
- You define the exact instruction
- Every visible match can trigger an alert
The Law of the Sentinel
Sentinel watches what you tell it to watch.
You set Sentinel. You choose the camera, explain the situation, and state the exact visible behavior that matters. For a colic watch or foaling monitoring session, your words define the visible condition BarnPilot should evaluate. Your instruction becomes the law for that session.
- 1Choose the camera
Select the view where the horse can be seen.
- 2Describe the situation
Give BarnPilot the context for the heightened watch.
- 3Write exactly what to watch for
Use a specific, visible condition or behavior. This becomes the Law of the Sentinel.
- 4Confirm and activate
The heightened monitoring schedule runs for 24 hours and may send more notifications than Standard.
24-HOUR HEIGHTENED MONITORINGEnhanced Protocol
Sentinel
Sentinel
WHAT IS THE SITUATION?
My horse is under observation after possible colic signs.
WHAT SPECIFICALLY SHOULD SENTINEL MONITOR FOR?
Notify me whenever my horse is visibly lying down.
Your words become the Law of the Sentinel.✓
I confirm these are my monitoring instructions.
ACTIVATE FOR $9.99ONE 24-HOUR SESSION
Important boundary
Sentinel evaluates visible still images against your exact instruction. It does not diagnose conditions, replace veterinary care, or guarantee detection. Contact a veterinarian for medical concerns or emergencies.
Supported hardware
Built into BarnPilot, not bolted on afterward.
The Reolink E1 Outdoor Pro is specifically supported inside the BarnPilot app. The onboarding process identifies the camera, joins it to the barn network, secures its private connection, and prepares it for BarnPilot monitoring.
01
Plug it inPower on the supported camera near your iPhone.
02
Scan the QR codeBarnPilot reads the UID label to identify the correct camera.
03
Connect barn Wi-FiChoose the network found where the camera will be installed.
04
Let BarnPilot go to workOur proprietary configuration sequence secures the connection and prepares Watcher and Sentinel.
Beyond standard camera alerts
Most smart cameras stop at live view and generic motion notifications. BarnPilot turns supported hardware into an equestrian monitoring system: Watcher follows routine visible barn activity, while Sentinel evaluates the exact visible condition the user writes for a heightened 24-hour session.
Pan + tiltMove the view in small, controlled steps.
Infrared night visionAutomatic low-light viewing after dark, or turn it completely off.
Secure pairingPrivate live camera credentials remain on the paired iPhone.
Up to four camerasPin one, reorder them, and connect horses to the right view.
Camera hardware is purchased separately. Hardware prices and availability are set by the retailer and may change.
Order supported camera
As an Amazon Associate, BarnPilot may earn from qualifying purchases.
Simple camera fees
Know exactly what is included.
Camera access and Watcher monitoring require BarnPilot Pro. Plans and Sentinel sessions are purchased through Apple; the App Store confirms the final localized price before purchase.
BarnPilot Pro
$29.99/month
Includes your first monitored camera.
- Camera access and live view
- Watcher Standard monitoring
- All other BarnPilot Pro features
Additional cameras
$19.99/camera/month
Add monitored camera slots as your setup grows.
- Up to three additional cameras
- $39.99/month for two
- $59.99/month for three
Sentinel
$9.99/24 hours
One user-defined heightened monitoring session.
- You define the situation and instruction
- May send more alerts than Standard
- Reminder two hours before it ends
Camera hardware is not included. Subscriptions are billed separately. Prices shown are U.S. prices; Apple displays the final localized price and terms.
Camera questions
Clear answers before you connect.
Does BarnPilot decide what Sentinel watches?
No. You choose the camera, describe the situation, and write the exact visible condition or behavior. Those words become the monitoring instruction for that 24-hour session.
Does the camera work at night?
Yes. The supported camera has automatic infrared night vision for low-light viewing. You can also turn infrared completely off in camera settings.
Can I move the camera from BarnPilot?
Yes. The live camera view includes four-direction pan and tilt controls. Each press makes a small adjustment to help you look around the stall or aisle.
Is camera monitoring included with BarnPilot Pro?
Pro includes one monitored camera. Each additional monitored camera costs $19.99 per month, with support for up to four cameras in this release.
Is Sentinel veterinary monitoring?
No. Sentinel does not diagnose, replace veterinary care, or guarantee detection. Contact a veterinarian for medical concerns or emergencies.
Can Sentinel support colic watch or foaling monitoring?
Sentinel can provide heightened horse monitoring for a user-defined visible condition, such as notifying you when a horse is visibly lying down during a colic watch or when visible signs of foaling have begun. It does not diagnose colic, predict birth, replace in-person observation, or replace veterinary care.
BarnPilot Cameras
Stay close, even when you leave the barn.
Camera access is available with BarnPilot Pro on iPhone and iPad.
Download on the App Store